原子氧和紫外线对聚酰亚胺综合作用数值模拟

在建立数学物理模型的基础上,对低地球轨道环境和地面试验环境下有无保护涂层的聚酰亚胺所受原子氧冲蚀及紫外线的综合作用进行了数值模拟,获得了具有工程应用价值的计算结果,并讨论了数学物理模型中各参数对基蚀曲线形状的影响.从数值模拟结果与美国太空试验结果的比较可以看出,得出的数值模拟的结果是正确的,对航天器设计具有重要的指导意义.     

柔性环境中的多目标决策及应用

提出了解决柔性环境中的多目标决策的一种人机交互式方法，该方法包括两个层次：（１）运用ｍａｘｉｍｉｎ方法进行优化；（２）根据决策者的愿望调整参数，再回到（１）。在计算机上实现了以上方法，并将该方法应用于修水县的扶贫规划。     

铝合金型材柔性垫弯曲成形实验研究

进行两种典型铝合金型材的弯曲实验,研究主要工艺参数对弯曲过程的影响.结果表明,型材的截面形状、相对厚度及抗弯截面系数等是决定弯曲性能的主要因素.压辊的压入深度、柔性垫的性能以及型材的约束方式等是影响弯曲半径、截面变化的关键.对实验中主要缺陷和质量问题的产生及其控制进行分析和讨论.     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

Kinetic Monte Carlo Simulation of EB-PVD Film:Effects of Substrate Temperature

The 2D kinetic Monte Carlo (KMC) simulation was used to study the effects of different substrate temperatures on the microstruc-ture of Ni-Cr films in the process of deposition by the electron beam physical vapor deposition (EB-PVD). In the KMC model, substrate was assumed to be a “surface” of tight-packed rows, and the simulation includes two phenomena: adatom-surface collision and adatom diffusion. While the interaction between atoms was described by the embedded atom method, the jumping energy was calculated by the molecular static (MS) calculation. The initial location of the adatom was defined by the Momentum Scheme. The results reveal that there exists a critical substrate temperature which means that the lowest packing density and the highest surface roughness structure will be achieved when the temperature is lower than the smaller critical value, while the roughness of both surfaces and the void contents keep decreasing with the substrate temperature increasing until it reaches the higher critical value. The results also indicate that the critical substrate temperature rises as the deposition rate increases.     

柔性空间飞行器的变结构控制

 本文研究了大型柔性结构空间飞行器的控制问题。采用设定模态法,将系统化为常微分方程组所描述的系统。此系统是非线性的,被控运动是绕中心毂体的转动机动运动,并详细的讨论了变结构控制规律的应用。     

功率谱密度(PSD)在评价超精密光学表面中的应用研究

用原子力显微镜对不同工艺下获得的超光滑反射镜基片进行了功率谱密度(PSD)检测,并对结果进行分析,以指导光学元件加工。     

柔性悬臂梁振动主动控制实验研究

以压电陶瓷为作动器，并采用独立模态控制法，对冲击载荷作用下的大柔度悬臂梁前三阶模态进行了振动主动控制研究。实验结果表明，使用独立模态控制方法，能有效地抑制悬臂梁的振动，控制效果非常明显。采用模态滤波和相移控制器进行模态分离和相位调节，可获得最大结构阻尼，取得良好的动态控制效果。     

应用于小发柔性转子的高速动平衡技术

从某新型涡轴发动机动力涡轮转子的结构特点出发 ,简要说明了对该转子进行实际高速动平衡操作存在的困难及采取的对策。在试验过程中 ,创造性地应用影响系数法和自行设计加工的精密平衡卡箍 ,高质量地完成了细长柔性转子的高速动平衡试验。研究表明 :高速动平衡技术可大大减小细长柔性转子的动挠度和支承动反力 ,从而达到减小发动机振动的目的     

大型挠性充液卫星的动力学模型

研究了带有多个挠性附件和液体燃料贮箱的中继卫星系统的动力学建模问题。给出了微重力下小幅线性晃动等效模型基本参数，用混合坐标法描述中继卫星系统的构形，利用虚功原理推导出的矩阵形式的中继卫星动力学模型简洁且具有一般性，适用于许多开链飞行器系统。